Xtreme 2 – Dual Pump Control Panel

Description

Xtreme 2 – Dual Pump Control Panel With High Level Alarm

Electronic panel with smart self-learning for direct start-up of 2 single or three phase pump. Features dry run protection via cos-φ and minimum current.

This product has replaced the QAR1M, LIFTY1M, and the SIMPLEX UP

Note –  The single phase version requires a suitably sized capacitor to suit the pump. Please specify on the ‘Order notes‘ section on the checkout page.

It is advised that float switches are also replaced when replacing a control panel. 

BENEFITS

• Minimum stock requirements:
  • A single panel for all single phase outputs up to 16A
  • A single panel for all three phase outputs up to 15A
• Operation with floats, pressure switches, level probes and transducers 4-20mA – 12V
• Use with clean or waste water
• USB port
• Data transfer and storage/data logger system
• Complete pump protection for:
  • dry running WITHOUT probes (minimum cosφ or minimum current)
  • overload
  • maximum start-ups/minute and maximum start-ups/hour
  • continuous operation fault (pipeline or float damage)
  • phases error
  • frequency error
  • min and max voltage
  • min and max current
  • motor klixon trip
  • water in oil chamber
• Programmable protection activation delay
• Possibility of activating or deactivating alternation of utilities
• Possibility of disabling motors
• Possibility of periodic self-test of utility
• Impeller cleaning system made by reverse rotation control
• Multilingual menu

V (50/60 Hz)	Model	Power (KW / HP)	Max Current (A)
1~230V	XTREME2-M/3	0,37÷2,2 | 0,5÷3	DA / FROM 2 | A/TO 16
3~400V	XTREME2-T/10	0,55÷7,5 | 0,75÷10	DA / FROM 2 | A/TO 15