Product images are for illustration purposes only.
Pedrollo TOP Submersible Clean Water Drainage Pumps
TOP Submersible Drainage Pumps – For Domestic applications including; draining small flooded areas, disposal of waste water, or for emptying drainage traps.
PERFORMANCE RANGE
Flow rate up to 360 l/min (21.6m³/h) Head up to 15.5m
Passage of suspended solids up to Ø 10 mm
Next Working Day Delivery (UK Mainland Only)
Price Match Promise | Find Out More
- Description
- Product Data
- Performance Data
- Downloads
- Reviews (12)
Description
Pedrollo TOP Submersible Clean Water Drainage Pumps
INSTALLATION & USE
The Pedrollo TOP submersible pump series is suitable for use with clear water that does not contain abrasive particles.
Innovative design and advanced technology are incorporated into these new Pedrollo TOP pumps, designed to be easy to use and extremely reliable even when subjected to continuous use (subject to correct installation).
As a result of the design solutions that have been adopted, such as the complete cooling of the motor, and the shaft with double seal, these pumps are perfect for most drainage applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of wastewater in the home (from dishwashers, washing machines) and for emptying drainage traps.
The motor is fully cooled and has an ample reserve of power plus a double seal system with a barrier chamber of bio-degradable oil. The motor and the pump are easily removed, making maintenance and repair simple. When designing performance levels for TOP pumps, special attention was given to typical requirements for domestic usage.
Performance curves are specially designed for high delivery rates at the low installed power rating.
CONSTRUCTION
Pump Body: Technopolymer
Suction Filter: Technopolymer
Suction Plate: Stainless Steel AISI 304
Diffuser: Technopolymer
Impeller: Noryl GFN2V
Motor Casing: Stainless Steel AISI 304
Motor Casing Plate: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104
Power Supply: 230V Single Phase (230/1/50)
Port TOP 1-2-3 – Outlet: 1’1/4″ BSP Male
Port TOP 4-5 – Outlet: 1’1/2″ BSP Male
Supplied with Hose Connector with Union (Hosetail):
TOP 1-2 ø 25mm
TOP 3 ø 35mm
TOP 4-5 ø 41mm
Cable Length: 5m
PERFORMANCE RANGE
Flow rate up to 360l/min (21.6 m³/h)
Head up to 15.5m
APPLICATION LIMITS
Immersion Depth: 3m for TOP 1-2-3; 5m for TOP 4-5
Maximum liquid temperature: 40 °C (maximum liquid temperature 90 °C for a maximum of 3 minutes of intermittent service)
Passage of suspended solids up to ø 10mm
Suction level: 14mm above ground level for TOP 1-2-3; 30mm above ground level for TOP 4-5
Continuous Service S1
Additional information
| Weight | 5.2 kg |
|---|---|
| Dimensions | Length: 152 mm Width: 152 mm Height: 257 mm |
| Model | TOP 1, TOP 2, TOP 3, TOP 4, TOP 5 |
| Select automatic or manual version | Manual No Float, Automatic With Float |
Performance Data
Downloads
12 reviews for Pedrollo TOP Submersible Clean Water Drainage Pumps
Add a review
You must be logged in to post a review.
Anonymous (verified owner) –
Simon Cranstone (verified owner) –
Antony (verified owner) –
Peter (verified owner) –
Doing the job quietly and well but check the output with the size of hose you are attaching
Mick Sherwin (verified owner) –
Anonymous (verified owner) –
Bryn (verified owner) –
Sharon Sims (verified owner) –
Conrad Rees (verified owner) –
Sarah T. (verified owner) –
Good pump, replacing identical one that had been in use for 7 years.
Robin Thornton (verified owner) –
…so far! The first pump we installed lasted 21 years, the next nine years so we hope for more this time!
Richard (verified owner) –
Good price of a great product