Italtecnica PM5 Water Pressure Switch With Graduated Scale

Italtecnica PM5 Water Pressure Switch Graduated Scale

INSTALLATION & USE

The PM5 Water pressure switch automatically starts and stops the electric water pump according to the set pressures. Commonly used in agricultural, irrigation, and borehole applications. This model contains a graduated scale that will allow visualisation of the cut in pressure of the pressure switch

Adjustment Range 1-5 Bar

FEATURES

Pressure switches for use with water in autoclave systems
Automatically starts and stops the electric water pump according to the set pressures
Electric Contacts: normally closed and made of brass alloy with Ag-Ni surfacing
Terminals with M4 screws and 8x8mm pressure dice
NBR rubber membrane with textile insert (food grade)
1/4″ F hydraulic connection made of galvanized steel
Graduated Scale for ease of setting of the cut in pressure
Standard protection degree IP 44
Max ambient temperature 55°C
Tear-resistant cable clamps

TECHNICAL DETAILS:

Pressure Range: 1-5 Bar
Factory Pre-Set Setting: 1.4-2.8 Bar
Minimum Difference: 0.6 Bar
Maximum Difference: 2.3 Bar
Rated Current: 16A (10)A
Rated Voltage: 250V