Low-Level – Submersible Flood Kit – 10M

Description

Low-Level Submersible Flood Kit – 10M

INSTALLATION & USE

This flood kit is designed for the removal of clean flood water that does not contain abrasive particles. The pump drains down to a level of 2mm.

Ideal for domestic use removing water from small flooded areas such as gardens, patios, garages, etc.

This kit comprises of an electric-powered submersible pump with 5 meters of electric cable, as well as 10m of 1 1/4″ hose, hose tail & hose clip.

Suitable for pumping up to a 10-meter level horizontal distance.

Note: The pump does not come with a float switch.

CONSTRUCTION

Single-phase 230 V – 50 Hz with thermal overload protector incorporated into the winding.
Insulation: Class F.
Protection: IP 68
Port: 1 ¼”

PERFORMANCE RANGE

Flow rate up to  160l/min (9.5 m³/h)
Head up to 8m

APPLICATION LIMITS

3 m maximum immersion depth
(with a sufficiently long power cable)
Liquid temperature up to 40°C
( 90°C for a maximum period of 3 minutes)
Passage of suspended solids up to Ø 5 mm
Suction level down to: 2mm above ground level