INSTALLATION & USE

Global Water Solutions’ Flow-Thru™ inline adaptors are ideally suited for continuous pressure systems where there is a risk of stagnant water in the tank. The Flow-Thru inline adaptor diverts the water through the tank while the water is running, eliminating the risk of stagnant water and reducing the risk of waterborne bacteria such as legionella. This constant flushing ensures the freshest water in the tank.

Flow-Thru inline adaptors are 1” full bore recirculation devices that offer superior flow rates compared to other 3/4” devices. Their unique design provides maximum circulation in the tank whilst assuring minimal pressure drop in the main pipe.

Key Features

• Self-orientating design eliminates the risk of leaking or overtightened connections.
• 1” Connection offering superior fresh water exchanges compared to other 3/4” designs
• Reduces the risk of water-borne diseases
• Includes the unique “auto alignment scoop” which guarantees the correct positioning of the Flow-Thru system

The post Anti Legionella Flow-Thru Inline Adaptor appeared first on Pump Express.

INSTALLATION & USE

250 Litre Pressure Vessel ideally suited for a wide range of applications, including booster systems, thermal expansion, heating expansion, irrigation systems, and hydraulic hammer arresting.

Vertical tanks are supplied with a base unit.

Efficient and cost effective, Challenger™ tanks are designed with a patented controlled action CAD-2 diaphragm assembly. They feature a chlorine resistant 100% butyl diaphragm with a precision moulded copolymer polypropylene liner for superior air and water separation. The CAD-2 diaphragm assembly is clenched together with a positive lock internal clench ring which contains drawdown water in a pre-charged air atmosphere, thus producing separation between the diaphragm and tank wall. This “air buffer” design means fewer problems with condensation. Constructed with an FDA approved high grade butyl, the diaphragm assembly seals water in a true non-corrosive chamber.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

Patented CAD-2 diaphragm technology
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Stainless steel water connection
Condensation reducing design
Two part polyurethane, epoxy primed paint finish
Leak free air valve cap sealed with closed cell foam
Comprehensive testing
No maintenance
Standard System Connection: : 1 1/4” BSP stainless steel elbow

APPLICATION LIMITS

Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post Challenger Series 250 Litre Vertical Pressure Vessel appeared first on Pump Express.

INSTALLATION & USE

450 Litre Pressure Vessel ideally suited for a wide range of applications, including booster systems, thermal expansion, heating expansion, irrigation systems, and hydraulic hammer arresting.

Vertical tanks are supplied with a base unit.

Efficient and cost effective, Challenger™ tanks are designed with a patented controlled action CAD-2 diaphragm assembly. They feature a chlorine resistant 100% butyl diaphragm with a precision moulded copolymer polypropylene liner for superior air and water separation. The CAD-2 diaphragm assembly is clenched together with a positive lock internal clench ring which contains drawdown water in a pre-charged air atmosphere, thus producing separation between the diaphragm and tank wall. This “air buffer” design means fewer problems with condensation. Constructed with an FDA approved high grade butyl, the diaphragm assembly seals water in a true non-corrosive chamber.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

Patented CAD-2 diaphragm technology
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Stainless steel water connection
Condensation reducing design
Two part polyurethane, epoxy primed paint finish
Leak free air valve cap sealed with closed cell foam
Comprehensive testing
No maintenance
Standard System Connection: : 1 1/4” BSP stainless steel elbow

APPLICATION LIMITS

Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post Challenger Series 450 Litre Vertical Pressure Vessel appeared first on Pump Express.

INSTALLATION & USE

150 Litre Pressure Vessel for use with Pressure Boosting Sets mainly for Agricultural and Commercial Use

Vertical ‘Hydrotube’ tanks are supplied with a base unit.

The PressureWave™ Pressure Vessel Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

PressureWave™ tanks are quality tested at several stages on the production line to ensure the structural integrity of every tank.

PressureWave™ tanks represent the best value for the investment and are the best quality pressure vessels available today.

** Note: The pre-charge pressure in the vessel should be set 2psi (0.14bar) below the CUT-IN pressure of the pump **

Common Applications:

PressureWave™ tanks are ideally suited for a wide range of applications, including water booster systems, thermal expansion, irrigation systems and hydraulic hammer arresting.

CONSTRUCTION

Single diaphragm design
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Patented stainless steel water connection
Virgin polypropylene liner
Two part polyurethane, epoxy primed paint finish
Leak free, o-ring sealed air valve cap
Comprehensive testing
No maintenance
Standard System Connection: 1″

APPLICATION LIMITS

Tank precharge: 1.9 bar / 28 psi
Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post PressureWave Series 150 Litre Vertical Pressure Vessel appeared first on Pump Express.

INSTALLATION & USE

100 Litre Pressure Vessel for use with Pressure Boosting Sets mainly for Agricultural and Commercial Use

Horizontal ‘Hydrotube’ tanks are supplied with a base unit.

The PressureWave™ Pressure Vessel Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

PressureWave™ tanks are quality tested at several stages on the production line to ensure the structural integrity of every tank.

PressureWave™ tanks represent the best value for the investment and are the best quality pressure vessels available today.

** Note: The pre-charge pressure in the vessel should be set 2psi (0.14bar) below the CUT-IN pressure of the pump **

Common Applications:

PressureWave™ tanks are ideally suited for a wide range of applications, including water booster systems, thermal expansion, irrigation systems and hydraulic hammer arresting.

CONSTRUCTION

Single diaphragm design
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Patented stainless steel water connection
Virgin polypropylene liner
Two part polyurethane, epoxy primed paint finish
Leak free, o-ring sealed air valve cap
Comprehensive testing
No maintenance
Standard System Connection: 1″

APPLICATION LIMITS

Tank precharge: 1.9 bar / 28 psi
Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post PressureWave Series 100 Litre Horizontal Pressure Vessel appeared first on Pump Express.

INSTALLATION & USE

100 Litre Pressure Vessel for use with Pressure Boosting Sets mainly for Agricultural and Commercial Use

Vertical ‘Hydrotube’ tanks are supplied with a base unit.

The PressureWave™ Pressure Vessel Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

PressureWave™ tanks are quality tested at several stages on the production line to ensure the structural integrity of every tank.

PressureWave™ tanks represent the best value for the investment and are the best quality pressure vessels available today.

** Note: The pre-charge pressure in the vessel should be set 2psi (0.14bar) below the CUT-IN pressure of the pump **

Common Applications:

PressureWave™ tanks are ideally suited for a wide range of applications, including water booster systems, thermal expansion, irrigation systems and hydraulic hammer arresting.

CONSTRUCTION

Single diaphragm design
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Patented stainless steel water connection
Virgin polypropylene liner
Two part polyurethane, epoxy primed paint finish
Leak free, o-ring sealed air valve cap
Comprehensive testing
No maintenance
Standard System Connection: 1″

APPLICATION LIMITS

Tank precharge: 1.9 bar / 28 psi
Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post PressureWave Series 100 Litre Vertical Pressure Vessel appeared first on Pump Express.

INSTALLATION & USE

300 Litre Pressure Vessel ideally suited for a wide range of applications, including booster systems, thermal expansion, heating expansion, irrigation systems, and hydraulic hammer arresting.

Vertical tanks are supplied with a base unit.

Efficient and cost effective, Challenger™ tanks are designed with a patented controlled action CAD-2 diaphragm assembly. They feature a chlorine resistant 100% butyl diaphragm with a precision moulded copolymer polypropylene liner for superior air and water separation. The CAD-2 diaphragm assembly is clenched together with a positive lock internal clench ring which contains drawdown water in a pre-charged air atmosphere, thus producing separation between the diaphragm and tank wall. This “air buffer” design means fewer problems with condensation. Constructed with an FDA approved high grade butyl, the diaphragm assembly seals water in a true non-corrosive chamber.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

Patented CAD-2 diaphragm technology
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Stainless steel water connection
Condensation reducing design
Two part polyurethane, epoxy primed paint finish
Leak free air valve cap sealed with closed cell foam
Comprehensive testing
No maintenance
Standard System Connection: : 1 1/4” BSP stainless steel elbow

APPLICATION LIMITS

Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post Challenger Series 300 Litre Vertical Pressure Vessel appeared first on Pump Express.

–  Adjustable arm length
–  1″ connection

The post Wall Bracket Support For Inline Pressure Vessel appeared first on Pump Express.

INSTALLATION & USE

200 Litre Pressure Vessel ideally suited for a wide range of applications, including booster systems, thermal expansion, heating expansion, irrigation systems, and hydraulic hammer arresting.

Vertical tanks are supplied with a base unit.

Efficient and cost effective, Challenger™ tanks are designed with a patented controlled action CAD-2 diaphragm assembly. They feature a chlorine resistant 100% butyl diaphragm with a precision moulded copolymer polypropylene liner for superior air and water separation. The CAD-2 diaphragm assembly is clenched together with a positive lock internal clench ring which contains drawdown water in a pre-charged air atmosphere, thus producing separation between the diaphragm and tank wall. This “air buffer” design means fewer problems with condensation. Constructed with an FDA approved high grade butyl, the diaphragm assembly seals water in a true non-corrosive chamber.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

Patented CAD-2 diaphragm technology
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Stainless steel water connection
Condensation reducing design
Two part polyurethane, epoxy primed paint finish
Leak free air valve cap sealed with closed cell foam
Comprehensive testing
No maintenance
Standard System Connection: : 1 1/4” BSP stainless steel elbow

APPLICATION LIMITS

Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post Challenger Series 200 Litre Vertical Pressure Vessel appeared first on Pump Express.

INSTALLATION & USE

60 Litre Pressure Vessel for use with Pressure Boosting Sets mainly for Agricultural and Commercial Use

Vertical ‘Hydrotube’ tanks are supplied with a base unit.

The PressureWave™ Pressure Vessel Series is constructed of a virgin poly11propylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel.

On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection.

PressureWave™ tanks are quality tested at several stages on the production line to ensure the structural integrity of every tank.

PressureWave™ tanks represent the best value for the investment and are the best quality pressure vessels available today.

** Note: The pre-charge pressure in the vessel should be set 2psi (0.14bar) below the CUT-IN pressure of the pump **

Common Applications:

PressureWave™ tanks are ideally suited for a wide range of applications, including water booster systems, thermal expansion, irrigation systems and hydraulic hammer arresting.

CONSTRUCTION

Single diaphragm design
NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Patented stainless steel water connection
Virgin polypropylene liner
Two part polyurethane, epoxy primed paint finish
Leak free, o-ring sealed air valve cap
Comprehensive testing
No maintenance
Standard System Connection: 1″

APPLICATION LIMITS

Tank precharge: 1.9 bar / 28 psi
Maximum working temperature: 90 °C
Maximum working pressure: 10 bar
 

The post PressureWave Series 60 Litre Vertical Pressure Vessel appeared first on Pump Express.