INSTALLATION & USE

Self-priming automatic electric pump, 12/24V, with constant pressure electronic variable speed control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:

-Transfer of light weight lube oils, antifreeze, etc…

-Transfer of diesel fuel between tanks, refueling of tractors, earth moving machines;

Control Panel

The control panel for electronic pumps allows to remotely monitor the operation of the pump and interact with it. It is in fact possible to see when the pump is On and if there is still liquid to be transferred. Furthermore, you can turn Off and On the pump with the simple push of a button.

In case of arrest due to end of liquid or overload, you can reset the alarm and restart the system without having to turn off the power.
The speed of the motor can be controlled in order to avoid problems like cavitation and/or overheating of the pump.

CONSTRUCTION

Code: 16475015
Type: UP12/E-BR
Volt: 12/24V
Fuse: 25A
Consumption: 14A (12V) 7A (24V)
Max Flow Rate: 36 l/min
Max Pressure: 2.5 Bar
Self Priming up to: 3m
Weight: 4.9kg
Dimensions 221x258x113mm
Ports: 1/2″ BSP with brass connection

PERFORMANCE RANGE

Max Flow Rate: 36 l/min
Max Pressure: 2.5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 85°C-185°F)
Allowed: Diesel Fuel minimum flashpoint (PM): 38°C-100°F
Allowed: Oil (max 86°C – 185°F)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <38°C-100°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%

The post Marco UP12/E-BR 12/24V Gear pump with pressure sensor + variable speed control appeared first on Pump Express.

INSTALLATION & USE

Self-priming electric pump with helical PTFE gears, non-return valve, and electronic control. Body and connections in nickel-plated brass, shaft in stainless steel. To be used
as an automatic pump for water systems. The electronic pressure sensor is preset at 2,5 bar.

Main use as an automatic pump or autoclave pump for freshwater and sanitary water systems on boats, yachts, vans, and camper vans.

CONSTRUCTION

Code: 16468115
Type: UP12 / E
Volt: 12/24
Fuse: 25A
Consumption: 3A
Motor Power: 360W
Self Priming up to: 3m
Weight: 4.9kg
Dimensions 212 x 113  x 242mm
Ports: 1/2″ BSP

PERFORMANCE RANGE

Max Flow Rate: 36 l/min
Max Pressure: 2.5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%

The post Marco UP12 / E With Electronic Control appeared first on Pump Express.

INSTALLATION & USE

The Marco SP2 Complete shower kit, with self-priming pump and electronic control. Equipped with helical PTFE gears, nickel-plated brass body and connections, integrated check valve. Complete with 4m white hose with screw connections and hand washer equipped with built-in white container.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
– Main use as automatic pump for freshwater and sanitary water systems on boats, campsites etc;

The electronic pressure sensor is preset at 2 bar.

CONSTRUCTION

Code: 16490015
Type: S2P
Volt: 12/24 V
Fuse: 7.5 A
Weight: 2.3kg
Ports: 3/8″ BSP
Self-priming (m): 1.5

PERFORMANCE RANGE

Max Flow Rate: 10 l/min
Max Pressure: 2 Bar 

APPLICATION LIMITS

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90°C

Fluids Allowed / Not Allowed:

Allowed: Fresh Water

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

The post Marco SP2 Shower Pump Kit 12/24V appeared first on Pump Express.

INSTALLATION & USE

Self-priming electric pump for transferring diesel and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.

There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:
– transfer of diesel between tanks, refuelling of tractors and earth moving equipment
– transfer of water
– transfer of lightweight lube oils, antifreeze etc.

CONSTRUCTION

Code: 1640011C
Type: UP3/AC
Volt: 230V-50Hz
Consumption: 0.8A
Fuse: 2A
Self Priming up to: 1.5m
Motor Power: 150W
Ports: 3/8″ BSP

PERFORMANCE RANGE

Max Flow Rate: 10 l/min
Max Pressure: 6 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C-104°F)
Allowed: Diesel Fuel minimum flashpoint (PM): 55°C-131°F

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <131°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90°C

The post Marco UP3/AC Gear Pump 220V appeared first on Pump Express.

INSTALLATION & USE

Self-priming electric pumps with PTFE helical gears, equipped with in-line filter, pressure switch, check valve to be used to automate pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
– main use as automatic pump for water pressure systems on boats, mobile homes, etc.
CONSTRUCTION

Code: 16466212
Type: UP2/A
Volt: 12V
Fuse: 7.5A
Consumption: 3A
Motor Power: 90W
Self Priming up to: 1.5m
Weight: 2kg
Dimensions 163 x 116  x 110mm
Ports: 3/8″ BSP

PERFORMANCE RANGE

Max Flow Rate: 10 l/min
Max Pressure: 1.5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%

The post Marco UP2/A Automatic Water Pressure System appeared first on Pump Express.

INSTALLATION & USE

Self-priming electric pumps with PTFE helical gears, equipped with in-line filter, pressure switch, check valve to be used as automatic pumps for water pressure systems on boats, mobile homes etc.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
– main use as automatic pump for water pressure systems on boats, mobile homes, etc.

CONSTRUCTION

Code: 16464012 (12V) 16464013 (24V)
Type: UP9/A
Nickelplated brass body, stainless steel shaft.
Volt: 12V or 24V
Fuse: 15A (12V) 10A (24V)
Consumption: 5A (12V)  3A (24V)
Self Priming up to: 1.5m
Motor Power: 180W
Weight: 4kg
Dimensions 189 x 255  x 120mm
Ports: 3/8″ BSP

PERFORMANCE RANGE

Max Flow Rate: 12 l/min
Max Pressure: 4 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <38°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%

The post Marco UP9/A Automatic Water Pressure System 12V/24V appeared first on Pump Express.

INSTALLATION & USE

Self-priming electric pumps for transferring of liquids with up to 7 bar pressure. Featuring a stainless steel pump body this pump is ideal in applications such as high pressure spraying of aggressive liquids, such as weed killer.

Code: 16440312 (12V)
Type: UP10XA
Volt: 12V
Fuse: 25A
Consumption: 11A
Self Priming: 3m
Weight: 4.1kg
Hose: 13mm
Motor power (W): 360
Ports (BSP): 3/8″
Seal:

PERFORMANCE RANGE

Max Flow Rate: 18 l/min
Max Pressure: 7 Bar (102psi)

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water & Sea Water (Max 40°C -104°F)
Allowed: Chemical Fuild

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <38°C-100°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: High Corrosive Chemical Products
NOT Allowed: Solvents

The post Marco UP10-XA 12V Aggressive Liquid Pump appeared first on Pump Express.

INSTALLATION & USE

Self-priming electric pumps with PTFE helical gears, equipped with in-line filter, pressure switch, check valve to be used to automate pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
– main use as automatic pump for water pressure systems on boats, mobile homes, etc.

CONSTRUCTION

Code: 16468013
Type: UP12/A
Volt: 24V
Fuse: 20A
Consumption: 10A
Self Priming up to: 3m
Weight: 5kg
Dimensions 217 x 260  x 120mm
Ports: 1/2″ BSP

PERFORMANCE RANGE

Max Flow Rate: 36 l/min
Max Pressure: 2.5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%

The post Marco UP12/A Automatic Water Pressure System appeared first on Pump Express.

INSTALLATION & USE

Complete pressure washing pump kit including an automatic self-priming electric pump equipped with helical PTFE gears, in-line filter, nickel plated brass body and check valve. With 10m stretchable coil hose and jet gun, equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation. The kit are particularly suitable for washing operations either with salt or fresh water.

Code: 16484012
Type: DP12
Volt: 12V
Fuse: 25A
Consumption: 24A
Self Priming up to: 3m
Weight: 6kg
Dimensions 217 x 262 x 115mm
Ports: 3/8″ BSP
Hose(mm): 13

PERFORMANCE RANGE

Max Flow Rate: 15 l/min
Max Pressure: 5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C-104°F)
Allowed: Sea Water (max. 40°C-104°F)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C-131°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%

The post Marco DP12 Pressure washing pump kit – 5 bar appeared first on Pump Express.

INSTALLATION & USE

Self-priming automatic electric pump, 12/24V, with constant pressure electronic variable speed control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR O-rings. Helical bronze gears guarantee constant pressure, heavy duty cycles, less noise and can operate in the absence of liquid. The pumps are supplied with a “High-Speed” setting for Diesel transfer. The integrated SCS control panel allows the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:

-Transfer of light weight lube oils, antifreeze, etc…

-Transfer of diesel fuel between tanks, refueling of tractors, earth moving machines;

Control Panel

The control panel for electronic pumps allows to remotely monitor the operation of the pump and interact with it. It is in fact possible to see when the pump is On and if there is still liquid to be transferred. Furthermore, you can turn Off and On the pump with the simple push of a button.

In case of arrest due to end of liquid or overload, you can reset the alarm and restart the system without having to turn off the power.
The speed of the motor can be controlled in order to avoid problems like cavitation and/or overheating of the pump.

CONSTRUCTION

Code: 16476015
Type: UP14/E-BR
Volt: 12/24V
Fuse: 30A
Consumption: 16A (12V) 8A (24V)
Max Flow Rate: 46 l/min
Max Pressure: 2.5 Bar
Self Priming up to: 3m
Weight: 5.2kg
Dimensions 201x174x111mm
Ports: 1/2″ BSP with brass connection

PERFORMANCE RANGE

Max Flow Rate: 46 l/min
Max Pressure: 2.5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 85°C-185°F)
Allowed: Diesel Fuel minimum flashpoint (PM): 38°C-100°F
Allowed: Oil (max 86°C – 185°F)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <38°C-100°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%

The post Marco UP14/E-BR 12/24V Gear pump with pressure sensor + variable speed control appeared first on Pump Express.