Sollatek AVS30 MICRO – Automatic Voltage Switcher

Description

Sollatek AVS30 MICRO – Automatic Voltage Switcher

The AVS is an Automatic Voltage Switcher rated at 30 Amps (AVS30). The AVS will switch off the equipment connected to it if the mains power goes outside preset acceptable limits and will re-connect automatically-when the mains power returns to normal. Re-connection takes place after a delay (‘the start-up delay’) to ensure stability of the mains. In addition, the start-up delay provides protection against power-back surges commonly experienced after resumption of power in a power cut situation.Surge and spike protection is also incorporated to ensure protection against these commonly occurring events.

Particularly suitable for protecting expensive pumps against:

• Over-voltage
• Under-voltage
• Surges / Spikes
• Power back surges

FEATURES

• Protects and prolongs the useful life of electrical appliances
• Eliminates the need to switch off appliances every time the electricity fails
• Safeguards valuable electrical appliances at all times
• Very low cost protection in relation to the value of appliances
• Different models available

TECHNICAL INFO

•  Nominal Voltage: 110V | 230V
•  Watts:  3300 | 7200
•  Frequency:  50/60 Hz
•  Load Current (Amps): 30 | 30
•  Inrush Current (20ms): 110 Amps
•  Max consumption (milli Amps) :<100mA
•  Wait Time 10s -10m plus manual
•  Over-Voltage Disconnect 230V-300V plus off
•  Over-Voltage Reconnect 2V below HVD setting
•  Under-Voltage Disconnect 150 – 230V
•  Under-Voltage Reconnect 5V above LVD setting
•  Max supply:     160V  |  320V
–  Spike / surge protection
–  Joules   80 | 160
–  Amps    6500A (8/20us)
•  Response 10 nanosecs
•  Response time (over voltage) <20 millisec
•  Response time (under voltage) adjustable  05 – 10 secs
•  Brown-out response time 20 millisec
Socket type direct via brass screw
• Dimensions 210mm  132mm  53mm

This new version of the AVS has a built-in micro-processor that has added advanced features to the product.

These include;

Five voltage indicators

• The power supply is good and the load is connected.
• The AVS has detected that the mains voltage is too high and therefore dangerous to your equipment. The AVS has disconnected the power supply.
• Power supply has returned to normal (after an over-voltage condition – see above).  The AVS is waiting before the power supply is restored to your equipment.
• Power supply has returned to normal (after an under-voltage condition – see below).  The AVS is waiting before the power supply is restored to your equipment.
• The AVS has detected low voltage condition and has disconnected the power to your equipment to protect against it.

TIMESAVE™ description

The Voltshield has a built-in microprocessor which adds the advanced feature TimeSave.™ TimeSave™ means that when the mains returns to normal, the Voltshield checks the duration of the OFF time. If the unit has been off for more than 3 minutes then it will reconnect the mains within 30 seconds rather than the standard 3 minutes.
This means the Sollatek Voltshield will give you more vital working time than any other switcher.