PRESFLO Pump Controller

Description

DG Flow – Presflo Electric Pump Controller

INSTALLATION & USE

The PRESFLO pressure-sensing pump controller automatically starts and stops the pump,

It is a substitute for traditional pressure switch/surge tank systems while offering important advantages

KEY FEATURES

– Water Accumulator – Built-in
– Non-Return Valve – Built-in
– 3 Piece Union – Integrated
– IP65 – Enclosure
– Resin-protected PCB
– Free Positioning – Vertical, Horizontal, or any angle
– Excessively Frequent Starts – Protection with auto reset
– Dry Run – Protection with auto reset

3 Piece Union – integrated – Avoiding the need for expensive 3-piece unions
Non-Return Valve – built-in and with easy inspection – Avoid the need to install one
Pressure Gauge – easy-to-add – Optional: it can be added anytime

Pump Matching Essential Check

Carefully check the electric and hydraulic features and make sure they comply with those of the pump and the system, but in particular:

Presflo 1.5 bars start pressure requires:
– pump head of at least 2.5 bars &
– the water column between the device and the highest user point
must not exceed 15 meters – less 2 meters tolerance = 13 mtrs

TECHNICAL DETAILS:

Max Pump Power: 1.5Kw / 2.0Hp
Start Pressure: 1.5 bar
Max Current: 16A
Water Storage: Spring Membrane
Protections: Dry Run / Frequent Starts
Voltage: 230V
Frequency: 50/60Hz
Connections: 1″ BSP – MALE INLET – FEMALE OUTLET
Cut-Off Flow Rate: 2 l/min
IP Protection: IP65

Includes both male and female BSP Outlet adaptors. 

2015 VERSION – PLEASE NOTE THIS HAS DIFFERENT DIMENSIONS & CONNECTIONS TO THE PREVIOUS MODEL.