INSTALLATION & USE

The Single foul packaged pump stations are designed to collect wastewater from below-ground extensions, garden rooms, small conversions. The VX pump range is designed to remove both clean and dirty water. Common applications would be to collect foul water from a W.C. sink, shower, kitchen or utility room and then discharge it to the main waste pipe or pumping sewage up to septic tanks and sewage treatment plants. Other applications include the removal of rainwater collecting in the basement. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

200 litre Sump Chamber
450mm inspection chamber frame and lid
1 x Pedrollo VXm10/50 automatic pump with fully assembled discharge pipe work
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
50mm solids handling for sewage with Vortex Pumps

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 200 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection 2” BSP male
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 1x Pedrollo VXm10/50 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment

The post Powerdrain Mini Basement Single Pump Station – Dirty Water 200ltr appeared first on Pump Express.

INSTALLATION & USE

The basement packaged pump stations are designed to collect ground or rainwater and pump to drain when gravity flows are not possible. Applications include drainage of nuisance water or surface water from basements and house extensions. The Powerdrain range has been designed to ensure an easy and trouble free installation.

FEATURES

200 litre Sump Chamber
450mm inspection chamber frame and lid
1 x Pedrollo Top2 automatic pump with fully assembled discharge pipe work.
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 200 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection: 1.5” BSP male 16 Bar (optional 40mm waste adaptor supplied)
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 1x Pedrollo Top2 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
High Level Alarm Optional: Mains/internal li-ion powered wireless High Level Alarm
Passage of suspended solids up to Ø 10 mm

The post Powerdrain Basement Single Pump Station – Clean Water 200ltr appeared first on Pump Express.

INSTALLATION & USE

The Mini basement packaged pump stations are designed to collect ground or rainwater and pump to drain when gravity flows are not possible. Applications include drainage of nuisance water or surface water from basements and house extensions. The Powerdrain range has been designed to ensure an easy and trouble free installation.

FEATURES

100 litre Sump Chamber
450mm inspection chamber frame and lid
1 x Pedrollo Top2 automatic pump with fully assembled discharge pipe work.
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 100 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection: 1.5” BSP male 16 Bar (optional 40mm waste adaptor supplied)
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 1x Pedrollo Top2 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
High Level Alarm Optional: Mains/internal li-ion powered wireless High Level Alarm
Passage of suspended solids up to Ø 10 mm

The post Powerdrain Mini Basement Single Pump Station – Clean Water 100ltr appeared first on Pump Express.

INSTALLATION & USE

The Twin foul packaged pump stations are designed to collect wastewater from below-ground extensions, garden rooms, small conversions. The VX pump range is designed to remove both clean and dirty water. Common applications would be to collect foul water from a W.C. sink, shower, kitchen or utility room and then discharge it to the main waste pipe or pumping sewage up to septic tanks and sewage treatment plants. Other applications include the removal of rainwater collecting in the basement. Twin pumps allow for a higher flow rate when removing waste water providing a more robust system. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

300 litre Sump Chamber
450mm inspection chamber frame and lid
2 x Pedrollo VXm10/50 automatic pump with fully assembled discharge pipework
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
50mm solids handling for sewage with Vortex Pumps

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 300 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection 2” BSP male
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 2x Pedrollo VXm10/50 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions: h: 1000mm ø: 740mm

Optional – Powerdrain – Twin Pump Control Panel Package

Electronic panel package for use with twin pump Powerdrain systems. Includes 4x Float Switch

BENEFITS

High-spec panel with audible alarm
Dry-run protection
Duty pump rotation
Over/Under voltage protection
Includes float switches

1~230V
Power (KW / HP): 0,37÷2,2 | 0,5÷3
Max Current (A): DA / FROM 2 | A/TO 16
SKU: 2700070

The post Powerdrain Foul Twin Pump Station 300ltr appeared first on Pump Express.

INSTALLATION & USE

The Single foul packaged pump stations are designed to collect wastewater from below-ground extensions, garden rooms, small conversions. The VX pump range is designed to remove both clean and dirty water. Common applications would be to collect foul water from a W.C. sink, shower, kitchen or utility room and then discharge it to the main waste pipe or pumping sewage up to septic tanks and sewage treatment plants. Other applications include the removal of rainwater collecting in the basement. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

300 litre Sump Chamber
450mm inspection chamber frame and lid
1 x Pedrollo VXm10/50 automatic pump with fully assembled discharge pipe work
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
50mm solids handling for sewage with Vortex Pumps

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 300 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection 2” BSP male
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 1x Pedrollo VXm10/50 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions: h: 1000mm ø: 740mm

The post Powerdrain Foul Single Pump Station 300ltr appeared first on Pump Express.

INSTALLATION & USE

The Twin basement packaged pump stations are designed to collect ground or rainwater and pump to drain when gravity flows are not possible. Applications include drainage of nuisance water or surface water from basements and house extensions. Twin pumps allow for a higher flow rate when removing water providing a more robust system. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

300 litre Sump Chamber
450mm inspection chamber frame and lid
2 x Pedrollo Top2 automatic pump with fully assembled discharge pipe work.
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
Main powered wireless high-level alarm

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 300 Litres
Volume Below Inlets: 150 Litres
Fixed Inlets : 4 off at 110mm diameter fitted with EDPM tank gaskets
Isolation Valve: Single union double seal EDPM ball valve
Discharge Connection: 1.5″ BSP Male with optional 40mm adaptor
Non-return Valve: Quiet operation EDPM swing check valve
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 40mm
Pumps: 2x Pedrollo Top2 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions :h: 1000mm ø: 740mm
Passage of suspended solids up to Ø 10 mm

Optional – Powerdrain – Twin Pump Control Panel Package

Electronic panel package for use with twin pump Powerdrain systems. Includes 4x Float Switch

BENEFITS

High-spec panel with audible alarm
Dry-run protection
Duty pump rotation
Over/Under voltage protection
Includes float switches

1~230V
Power (KW / HP): 0,37÷2,2 | 0,5÷3
Max Current (A): DA / FROM 2 | A/TO 16
SKU: XT/2/m3/T80x4

The post Powerdrain Basement Twin Pump Station 300ltr appeared first on Pump Express.

INSTALLATION & USE

The Mini basement packaged pump stations are designed to collect waste water from below ground extensions, garden rooms, small conversions.
The ZX pump range is designed to remove both clean and dirty water.

Common applications would be to collect foul water from a W.C. sink, shower, kitchen or utility room and then discharge it to the main waste pipe or pumping sewage up to septic tanks and sewage treatment plants.

Other applications include the removal of rain water collecting in the basement. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

140 litre Sump Chamber
450mm inspection chamber frame and lid
1 x Pedrollo ZX automatic pump with fully assembled discharge pipe work.
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 140 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection: 1.5” BSP male 16 Bar (optional 40mm waste adaptor supplied)
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 1x Pedrollo ZX Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Dimensions: h: 625mm ø: 510mm
Passage of suspended solids up to Ø 40 mm

The post Powerdrain Mini Basement Single Pump Station – Dirty Water 140ltr appeared first on Pump Express.

INSTALLATION & USE

The Twin foul packaged pump stations are designed to collect wastewater from below-ground extensions, garden rooms, small conversions. The VX pump range is designed to remove both clean and dirty water. Common applications would be to collect foul water from a W.C. sink, shower, kitchen or utility room and then discharge it to the main waste pipe or pumping sewage up to septic tanks and sewage treatment plants. Other applications include the removal of rainwater collecting in the basement. Twin pumps allow for a higher flow rate when removing waste water providing a more robust system. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

240 litre Sump Chamber
450mm inspection chamber frame and lid
2 x Pedrollo VXm10/50 automatic pump with fully assembled discharge pipework
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
50mm solids handling for sewage with Vortex Pumps

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 240 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection 2” BSP male
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 2x Pedrollo VXm10/50 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions: h: 800mm ø: 740mm

Optional – Powerdrain – Twin Pump Control Panel Package

Electronic panel package for use with twin pump Powerdrain systems. Includes 4x Float Switch

BENEFITS

High-spec panel with audible alarm
Dry-run protection
Duty pump rotation
Over/Under voltage protection
Includes float switches

1~230V
Power (KW / HP): 0,37÷2,2 | 0,5÷3
Max Current (A): DA / FROM 2 | A/TO 16
SKU: 2700070

The post Powerdrain Foul Twin Pump Station 240ltr appeared first on Pump Express.

INSTALLATION & USE

The Single foul packaged pump stations are designed to collect wastewater from below-ground extensions, garden rooms, small conversions. The VX pump range is designed to remove both clean and dirty water. Common applications would be to collect foul water from a W.C. sink, shower, kitchen or utility room and then discharge it to the main waste pipe or pumping sewage up to septic tanks and sewage treatment plants. Other applications include the removal of rainwater collecting in the basement. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

240 litre Sump Chamber
450mm inspection chamber frame and lid
1 x Pedrollo VXm10/50 automatic pump with fully assembled discharge pipe work
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
50mm solids handling for sewage with Vortex Pumps

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 240 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection 2” BSP male
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 1x Pedrollo VXm10/50 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions: h: 800mm ø: 740mm

The post Powerdrain Foul Single Pump Station 240ltr appeared first on Pump Express.

INSTALLATION & USE

The Twin basement packaged pump stations are designed to collect ground or rainwater and pump to drain when gravity flows are not possible. Applications include drainage of nuisance water or surface water from basements and house extensions. Twin pumps allow for a higher flow rate when removing water providing a more robust system. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

240 litre Sump Chamber
450mm inspection chamber frame and lid
2 x Pedrollo Top2 automatic pump with fully assembled discharge pipe work.
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
Main powered wireless high-level alarm

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 240 Litres
Volume Below Inlets: 150 Litres
Fixed Inlets : 4 off at 110mm diameter fitted with EDPM tank gaskets
Isolation Valve: Single union double seal EDPM ball valve
Discharge Connection: 1.5″ BSP Male with optional 40mm adaptor
Non-return Valve: Quiet operation EDPM swing check valve
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 40mm
Pumps: 2x Pedrollo Top2 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions :h: 800mm ø: 740mm
Passage of suspended solids up to Ø 10 mm

Optional – Powerdrain – Twin Pump Control Panel Package

Electronic panel package for use with twin pump Powerdrain systems. Includes 4x Float Switch

BENEFITS

High-spec panel with audible alarm
Dry-run protection
Duty pump rotation
Over/Under voltage protection
Includes float switches

1~230V
Power (KW / HP): 0,37÷2,2 | 0,5÷3
Max Current (A): DA / FROM 2 | A/TO 16
SKU: 2700070

The post Powerdrain Basement Twin Pump Station 240ltr appeared first on Pump Express.