Description

Powerdrain Basement Twin Pump Station

INSTALLATION & USE

The Twin basement packaged pump stations re designed to collect ground or rainwater and pump to drain when gravity flows are not possible. Applications include drainage of nuisance water or surface water from basements and house extensions. Twin pumps allow for a higher flow rate when removing water providing a more robust system. The Powerdrain range has been designed to ensure an easy and trouble free installation.

FEATURES

240 litre Sump Chamber
450mm inspection chamber frame and lid
2 x Pedrollo Top2 automatic pump with fully assembled discharge pipe work.
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
Main powered wireless high level alarm

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 240 Litres
Volume Below Inlets: 150 Litres
Fixed Inlets : 4 off at 110mm diameter fitted with EDPM tank gaskets
Isolation Valve: Single union double seal EDPM ball valve
Discharge Connection: 1.5″ BSP Male with optional 40mm adaptor
Non-return Valve: Quiet operation EDPM swing check valve
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 40mm
Pumps: 2x Pedrollo Top2 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions :h: 800mm ø: 740mm
Passage of suspended solids up to Ø 10 mm

Additional information

Performance Data

Downloads

Powerdrain Brochure
Powerdrain O&M Manual