Product images are for illustration purposes only.
Pedrollo D Submersible Drainage Pumps 110v
D Submersible Drainage Pumps 110v – For Domestic & Civil applications. Designed for draining clear or slightly dirty water
Flow rate up to 300 l/min (18m³/h) Head up to 16m
Passage of suspended solids up to Ø 10 mm
Next Working Day Delivery (UK Mainland Only)
- Product Data
- Performance Data
- Reviews (0)
Pedrollo D Submersible Drainage Pumps – 110v
INSTALLATION & USE
Pedrollo D pumps are designed for draining clear or slightly dirty water, the D series pumps are recommended for domestic, civil and professional applications for draining flooded interiors such as basements and
garages, for emptying swimming pools and tanks, for disposal of waste water which is not filthy.
These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations.
Please note: Three Phase Pumps do not come with a float switch.
110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.
Pump Body: Cast Iron with threaded port in compliance with ISO 228/1
Suction Filter: Stainless Steel AISI 304
Suction Plate: Stainless Steel AISI 304
Impeller: Technopolymer open type (closed for D30)
Motor Casing: Stainless Steel AISI 304
Motor Casing Plate: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104
Power Supply: 110V Single Phase (110/1/50)
Outlet: 1’1/2″ BSP Female
Power cable length: 10 m
– Float switch for single-phase versions
Flow rate up to 300l/min (18 m³/h)
Head up to 16m
– 5 m maximum immersion depth
(with a sufficiently long power cable)
– Maximum liquid temperature 40 °C
– Passage of suspended solids up to Ø 10 mm
– Suction down to 17 mm above ground level
– Minimum immersion depth for continuous service: 220 mm
|Dimensions||L 232 x W 232 x H 340 mm|