Product images are for illustration purposes only.
Pedrollo TOP Submersible Drainage Pumps for Clear Water 110v
TOP Submersible Drainage Pumps – For Domestic applications including; draining small flooded areas, disposal of waste water, or for emptying drainage traps.
Flow rate up to 360 l/min (21.6m³/h) Head up to 15.5m
Passage of suspended solids up to Ø 10 mm
Next Working Day Delivery (UK Mainland Only)
- Product Data
- Performance Data
- Reviews (0)
Pedrollo TOP Submersible Drainage Pumps for Clear Water – 110v
INSTALLATION & USE
The Pedrollo TOP submersible pump series is suitable for use with clear water that does not contain abrasive particles.
Innovative design and advanced technology are incorporated into these new Pedrollo TOP pumps, designed to be easy to use and extremely reliable even when subjected to continuous use (subject to correct installation).
As a result of the design solutions that have been adopted, such as the complete cooling of the motor, and the shaft with double seal, these pumps are perfect for most drainage applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps.
The motor is fully cooled and has an ample reserve of power plus a double seal system with barrier chamber of bio-degradable oil. The motor and the pump are easily removed, making maintenance and repair simple. When designing performance levels for TOP pumps, special attention was given to typical requirements for domestic usage.
Performance curves specially designed for high delivery rates at the low installed power rating.
110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.
Pump Body: Technopolymer
Suction Filter: Technopolymer
Suction Plate: Stainless Steel AISI 304
Impeller: Noryl GFN2V
Motor Casing: Stainless Steel AISI 304
Motor Casing Plate: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104
Power Supply: 110V Single Phase (110/1/50)
Port TOP 1-2-3 – Outlet: 1’1/4″ BSP Male
Port TOP 4-5 – Outlet: 1’1/2″ BSP Male
Supplied with Hose Connector with Union (Hosetail):
TOP 1-2 ø 25mm
TOP 3 ø 35mm
TOP 4-5 ø 41mm
Cable Length: 10m
Flow rate up to 360l/min (21.6 m³/h)
Head up to 15.5m
Immersion Depth: 3m for TOP 1-2-3; 5m for TOP 4-5
Maximum liquid temperature: 40 °C (maximum liquid temperature 90 °C for a maximum of 3 minutes of intermittent service)
Passage of suspended solids up to ø 10mm
Suction level: 14mm above ground level for TOP 1-2-3; 30mm above ground level for TOP 4-5
Continuous Service S1
|Dimensions||L 152 x W 152 x H 257 mm|