Pedrollo PKS Self Priming Pumps with Peripheral Impeller – Side Suction

Description

Pedrollo PKS Self Priming Pumps with Peripheral Impeller – Side Suction

INSTALLATION & USE

Pedrollo PKS Self Priming Pumps with Peripheral Impeller are suitable for use with clean water that does not contain abrasive particles and with liquids that are not chemically aggressive towards the materials from which the pump is made. Because of their compactness, reliability, and the fact that they are easy to use, they are suitable for use in domestic applications such as the distribution of water in combination with small pressure tanks, for the irrigation of gardens and orchards, for drawing water from tanks and for all those other situations where air or gas may be present in the water to be pumped. The pump comes complete with a flap-check valve

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

CONSTRUCTION

Pump Body: Cast Iron
Motor Bracket: Aluminium with Brass Insert
Impeller: Brass
Motor Shaft: Stainless Steel
Mechanical Seal: Ceramic / Graphite / NBR
Power Supply: 230V Single Phase (230/1/50) or 400V Three Phase (400/3/50)

PERFORMANCE RANGE

Flow rate up to 40 l/min (2.4 m³/h)
Head up to 40m

APPLICATION LIMITS

– Manometric suction lift up to 9 m (HS)
– Liquid temperature between -10 °C and 60 °C
– Ambient temperature up to 40 °C ( 45 °C for PKS 60)
–  Max. working pressure:  6 bar for PKS 60, PKS 65 – 7 bar for PKS 70, PKS 80
– Continuous service S1

Additional information

Performance Data

Downloads

PKS Datasheet