POWERBOOST FLOW V5/80 – Twin Booster Set 90l/min @4bar

Description

POWERBOOST FLOW V5/80 – Twin Booster Set 90l/min @4bar

INSTALLATION & USE

If the regular mains supply is insufficient to supply multiple outlets simultaneously a booster set is required. This Twin 5 Bar Cold Water Booster Set is designed to replicate a good mains pressure and supply an abundance of water to suit demand.

– It is designed for large domestic and small commercial applications such as guest houses, hotels, sports clubs, or multiple occupation dwellings
– It will provide increased flow at sufficient pressure to supply multiple outlets
– These water booster sets utilise Pedrollo pumps throughout

The units are well suited to very large domestic premises or small commercial properties with lots of outlets (showers, taps, etc) and a wide variation in water requirements. The units come pre-assembled on a base plate with stainless steel inlet/outlet manifolds. The booster sets are pre-wired ready to go and work on either a duty/assist basis (second pump comes on when water demand increases) or a duty/standby (1 pump supplying the full duty with a backup pump of the same capacity).

PERFORMANCE RANGE

At 4 bar this twin cold water booster set is capable of approximately 90 liters/min

OVERVIEW & DESIGN

– Energy-saving solution
– User Friendly
– CE Marked
– WRAS approved pumps
– Low maintenance costs
– High-quality European-manufactured pumps
– Easy to setup and operate

CONSTRUCTION

Manifold sizes: 2″ BSP Male
Power Supply: 230V/1PH/50Hz

Important Note: Connection to inlet manifolds must be of similar or greater size.
NB  All pumps must be fed from a suitably sized water tank.

CONTROL OPTION

Flow-V – Constant Pressure – Steadypres

– Constant working pressure – selectable/adjustable
– Variable speed drive (VSD) per pump
– Drives are water cooled
– Advanced power management
– Operation log including; alarms & hours run