Pedrollo CP Centrifugal Pumps with S/S Impeller

Description

Pedrollo CP Centrifugal Pumps with S/S Impeller

INSTALLATION & USE

Pedrollo CP Centrifugal Pumps are suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made. As a result of their reliability, and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens and allotments.

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

CONSTRUCTION

Model: Pedrollo CPm100 | CP130 | CP132 | CP150 | CP158 | CP170 | CP170M | CP190 | CP200
Cast iron pump body, complete with threaded ports in compliance with ISO 228/1
Stainless steel AISI 304 body backplate (cast iron for CP190-200)
Stainless steel impeller with peripheral radial vanes
Stainless steel motor shaft EN 10088-3 – 1.4104
Power Supply: 230V Single Phase (230/1/50) or 400V Three Phase (400/3/50)
Ports: 1″ & 1″(CP100 – CP158)   1 1/4″ & 1″ (CP170 – CP200)

PERFORMANCE RANGE

Flow rate up to 160 l/min (9.6 m³/h)
Head up to 56m

APPLICATION LIMITS

– Manometric suction lift up to 7m
– Liquid Temperature Between -10°C and 90°C
– Ambient Temperature up to 40°C
– Max. Working Pressure: 6 bar for CP100-158, 10 bar for CP170-200
– Continuous service S1

Additional information

Weight	7.1 kg
Dimensions	Length: 253 mm Width: 165 mm Height: 205 mm
Model	CP100, CP130, CP132, CP150, CP158, CP170, CP170M, CP190, CP200
Motor Type	Single Phase, Three Phase

Performance Data

Downloads

CP Datasheet