Pedrollo PQAm60 Pumps with Peripheral Impeller 110V

Description

Pedrollo PQAm60 Pumps with Peripheral Impeller – Side Suction – 110V

INSTALLATION & USE

The Pedrollo PQAm60 peripheral pumps are recommended for pumping clean water without abrasive particles and with liquids which are not chemically aggressive towards the materials with which the pump is made. The RYTON and brass pump body construction guarantees against the formation of rust and oxidation. Because of these characteristics these peripheral pumps are suitable for use in commercial & industrial applications such as cooling, conditioning, boiler feeds and pressurisation sets.

– High heads achieved from low motor powers
– Small variations in delivery rates in the event of changes in the pressure demand
– High tolerance to entrained air in the pumped liquid

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

COMMON APPLICATIONS

Commercial – Cleaning Beer Line Systems;
Industrial – Chillers, Pressurisation Filler Units, Pressurisation Sets, Boiler Feeds, Coolant Systems

Equivalent to Lowara PABLRM15 peripheral pump.
Can be used as replacement pumps in Flamco Flexfiller, Armstrong 3750 Pressurisation Units & Lowara Presfix Pressurisation Sets.

110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.

CONSTRUCTION

Pump Body: RYTON; Brass
Motor Bracket: Aluminium with Brass Insert
Impeller: Brass
Motor Shaft: Stainless Steel
Mechanical Seal: Ceramic / Graphite / NBR
Port sizes: ½”
Power Supply: 110V

PERFORMANCE RANGE

Flow rate up to 32 l/min (1.9 m³/h)
Head up to 38m

APPLICATION LIMITS

– Manometric Suction Lift up to 8m
– Liquid Temperature Between -10°C and 90°C
– Ambient Temperature Between -10°C 40°C  ( 45 °C for PQA60)
– Max. Working Pressure:  10 bar