POWERBOOST FLOW V6/200 – Twin Booster Set 340l/min @4bar

POWERBOOST FLOW V6/200 – Twin Booster Set 340l/min @4bar

INSTALLATION & USE

If regular mains supply is insufficient to supply multiple outlets simultaneously a booster set is required. This Twin 5 Bar Cold Water Booster Set is designed to replicate a good mains pressure and supply an abundance of water to suit demand.

– It is designed for large domestic and small commercial applications such as guest houses, hotels, sports clubs, or multiple occupation dwellings
– It will provide increased flow at sufficient pressure to supply multiple outlets
– These water booster sets utilise Pedrollo pumps throughout

The units are well suited to very large domestic premises or small commercial properties with lots of outlets (showers, taps etc) and a wide variation in water requirements. The units come pre-assembled on a base-plate with stainless steel inlet/outlet manifolds. The booster sets are pre-wired ready to go and work on either a duty/assist basis (second pump comes on when water demand increases) or a duty/standby (1 pump supplying the full duty with a backup pump of the same capacity).

PERFORMANCE RANGE

At 4 bar this twin cold water booster set is capable of approximately 340 litres/min

Duty/Assist & Duty/Standby
Most Requested Performance Presets:

340 LPM at 4 Bar
300 LPM at 5 Bar
240 LPM at 6 Bar

If you would like system preset to a particular pressure please specify in the order notes. 

OVERVIEW & DESIGN

– Energy saving solution
– User Friendly
– CE Marked
– WRAS approved pumps
– Low maintenance costs
– High quality European manufactured pumps
– Easy to setup and operate

CONSTRUCTION

Manifold sizes:
– Inlet: 2 ^1/2” BSP Male
– Outlet: 2″ BSP Male
Power Supply: 230V/1PH/50Hz

Important Note: Connection to inlet manifolds must be of similar or greater size.
NB  All pumps must be fed from a suitably sized water tank.

CONTROL OPTION

Flow-V – Constant Pressure – Steadypres

– Constant working pressure – selectable/adjustable
– Variable speed drive (VSD) per pump
– Drives are water cooled
– Advanced power management
– Operation log including; alarms & hours run

Boost Water Pressure in Commercial Properties with Custom Cold Water Booster Sets

Commercial building—such as a hotel, guesthouse, bed and breakfast (B&B), apartment complex, or a multi-storey building such as office complexes can be experiencing low water pressure or inconsistent flow, a custom-designed cold water booster pump set may be the right solution, or the upgrade your system needs.

Our cold water booster systems are ideal for large domestic residences and commercial premises. These high-efficiency booster sets offer a cost-effective, low-maintenance, and high-performance solution. Our boosters deliver the right water pressure and ensure consistent water flow across your property.

Multiple water outlets, including showers, sinks, taps, tooling machines and toilets should be considered and are just a few points of use in a project.

Not sure which water pressure boosting system is right for your application? Our expert team is here to help. Contact us today for personalised advice—we’ll guide you in selecting the most suitable cold water pressure booster set tailored to your building’s needs.

All our made-to-order booster units are engineered and tested to meet the highest industry standards. Whether you’re dealing with poor mains pressure, high demand during peak usage, or planning a new plumbing installation, we’ll specify the exact commercial water booster pump required to meet your flow rate and pressure requirements. Our made-to-order booster units are preset to your requirements in readiness for a speedier installation, plug-and-play

If your project demands something unique, we also offer bespoke water booster solutions—custom-built systems designed to match your specific technical and operational needs. If you cannot see it ask us?