Ecosoft Domestic Reverse Osmosis Water Filter with Pump

Description

Ecosoft Domestic Reverse Osmosis Water Filter with Pump

INSTALLATION & USE

Reverse osmosis is the most effective technology for the purification of water for drinking. It reduces 99.8% of impurities, as well as odours, flavours, and viruses making water clear, clean, pleasant to the taste, and safe for human health, both for adults and children. The reverse osmosis filter is also one of the most cost-effective methods of domestic water purification.

Producing your own pure water is more cost effective than buying bottled water and reduces plastic waste.

Pumped (For incoming mains water pressure below 3 bar)

Benefits and Uses

• Source of absolutely clean and safe drinking water
• Dishes cooked with the water will taste better
• Coffee beans and tea leaves will open up their flavors and aroma
• Home appliances (kettle, iron, steam cooker, air humidifier etc.) will be protected from scale
• The water is ideal to water house plants
• Can be used to produce pure water for aquariums

Features & Advantages of the Ecosoft domestic RO system               

• Ecosoft membrane element
• 5 stages of water purification
• 7.9 L of drinking water per hour
• Up to 7 L storage tank
• Great tasting water thanks to the included coconut shell carbon filter
• Filter housing made of pure European food grade plastic
• Special vacuum tightness control
• Easy to install

Stages of the domestic RO

Stage one
Removes large (more than 5 microns) particles of mechanical impurities (silt, sand, rust, scale

Stage two
Neutralises chlorine, organic and organochlorine compounds (pesticides, dioxides, etc.). As a result, the taste, colour and odour of water is improv

Stage three
Fine cleaning of mechanical impurities more than 1 micron.

Stage four
Reverse osmosis. The pre- treated water is passed through a membrane, removing dissolved salts and impurities.

Stage five
Post-carbon filter. Absorbs the gases dissolved in the water and gives the water a pleasant, natural taste.

TECHNICAL DETAILS

Inlet pressure for filter without pump, atm: 3–6*
Inlet pressure for filter with pump, atm: 2–4.5*
Pressure in storage tank, atm: 0.4–0.6**1
Temperature of feed water, °C: +4…+30***
Filter weight (basic configuration), kg: 7
Temperature of environment limit, °C: +5…+40***
Water supply external connection, inches: thread, ½

Recommend using qualified installer.

* If the pressure in the water supply system is lower than indicated, the filter should be supplied with a pump. If the pressure in the water supply system is higher than indicated, it is necessary to install a pressure regulator at the inlet before the reverse osmosis filter.

** If the pressure is lower or higher than indicated, it is necessary to pump up or release the pressure.

*** If the temperature of feed water is within the range +20…+30 °C, selectiveness of the membrane insignificantly decreases, and capacity increases leading to insignificant growth of the TDS indicator. Application of the filter when the temperature of feed water exceeds +30 °C is not recommended.

CONSTRUCTION

Filtration module with domestic pump
Plastic storage tank (general vol. 12 L, effective vol. up to 7 L)
Chrome ball valve faucet ‘Droplet’ for purified water
Included feed water adaptor with feed valve for connection with water mains
Ball valve faucet of storage tank
Set of color tubes (4 pc.) for convenient filter installation
Drain saddle clip for connection of the filter to sewers
Set of replacement pre-filters (1st, 2nd, 3rd stages)
Ecosoft membrane 50 GPD (190 L per day)
Service wrenches for replacement of filters and the membrane