Marco UP2/A Automatic Water Pressure System

Description

Marco UP2/A Automatic Water Pressure System

INSTALLATION & USE

Self-priming electric pumps with PTFE helical gears, equipped with in-line filter, pressure switch, check valve to be used to automate pumps for water pressure systems on boats, mobile homes etc. Nickelplated brass body, stainless steel shaft.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
– main use as automatic pump for water pressure systems on boats, mobile homes, etc.
CONSTRUCTION

Code: 16466212
Type: UP2/A
Volt: 12V
Fuse: 7.5A
Consumption: 3A
Motor Power: 90W
Self Priming up to: 1.5m
Weight: 2kg
Dimensions 163 x 116  x 110mm
Ports: 3/8″ BSP

PERFORMANCE RANGE

Max Flow Rate: 10 l/min
Max Pressure: 1.5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90%