Marco UP3/OIL 12V/24V Gear Pump for Lubricating Oil

Description

Marco UP3/OIL 12V/24V Gear Pump for Lubricating Oil

INSTALLATION & USE

Electric Oil Transfer Gear Pump particularly suitable for the transfer of lubricating oils or viscous liquids, complete with two brass connections for 14mm inner tube and one additional quick-fit connection for 8mm external tubing. The pump can be used for extracting lubricating oil out of oil sumps of engines through the special tube kit (OK1). Brass body with bronze gears, stainless steel shaft and rubber lip seal.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:

• Transfer of lubricating oil
• Transfer of viscous liquids
• Transfer of oils, antifreeze
• Circulation of viscous liquids
• Draining of engine sumps

CONSTRUCTION

Code: 16402012 (12V) or 16402013 (24V)
Volt: 12 or 24V
Consumption: 5A (12V model) 3A (24V model)
Weight: 1.4kg
Dimensions 139x108x86 mm
Outlet 14mm
Max self priming to 1 meter
Ports: 3/8″ BSP

PERFORMANCE RANGE

Max Flow Rate: 5.5 l/min
Max Pressure: 2 Bar (29psi)

APPLICATION LIMITS

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90°C

Fluids Allowed / Not Allowed:

Allowed: Fresh Water
Allowed: Motor Oil (max 120°C°C-248°F) max viscosity 350 cSt
Allowed: Diesel – Minimum flash point (PM): 55°C – 131°F

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents