Marco UP6/AC Gear Pump 220V

Description

UP6/AC 220V Gear pump PTFE

INSTALLATION & USE

Self-priming electric gear pump for the transfer of liquids of varied nature for discontinuous or intermittent usage. Completely equipped with in-line filter on the inlet side.

There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:
– transfer of diesel between tanks, refuelling of tractors and earth moving equipment
– transfer of water
– transfer of lightweight lube oils, antifreeze etc.

CONSTRUCTION

Code: 1640611C
Type: UP6/AC
Volt: 220V
Consumption: 1.7A
Fuse: 2.5A
Self Priming up to: 1.5m
Ports: 1/2″ BSP

PTFE gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seals in FKM and O-ring in NBR.

PERFORMANCE RANGE

Max Flow Rate: 28 l/min
Max Pressure: 5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C-104°F)
Allowed: Diesel Fuel minimum flashpoint (PM): 55°C-131°F

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <131°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90°C