MS 07-08-10 Multistage Centrifugal Pumps

Description

MS 07-08-10 Multistage Centrifugal Pumps

INSTALLATION & USE

For an alternative to this product please see the Pedrollo CR range.

The MS Range of multi-stage centrifugal pumps are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.

Due to their reliability and quiet running, they are suitable for domestic applications including water supplies (as a pressure set), garden irrigation, etc.

The pumps must be installed in enclosed places, or at least protected against inclement weather.

CONSTRUCTION

Pump Body: Stainless steel AISI 304 , with threaded ports ISO 228/1.
Body Back-Plate: Stainless steel AISI 304
Impellers: of the type with centrifugal radial flow, made of technopolymer (approved for drinking water).
Motor Shaft: Stainless steel EN 10088-3 – 1.4104.
Mechanical Seal: Ceramic – graphite – NBR
Electric Motor: The pumps are close-coupled to a carefully matched electric motor, quiet running, totally enclosed fan cooled, suitable for continuous duty.
MS M: single-phase 230 V – 50 Hz with capacitor and thermal overload protector.
Insulation: class F.
Protection: IP 44.
1″ Ports

PERFORMANCE RANGE

Flow rate up to  130l/min (7.8 m³/h)
Head up to 52m

APPLICATION LIMITS

– Manometric suction lift up to 7m
– Liquid temperature between -10 ° C and +40 °C
– Ambient temperature up to +40 °C
– Max. working pressure 7 bar

 

Additional information

Weight	7.3 kg
Dimensions	Length: 361 mm Width: 182 mm Height: 182 mm

Performance Data

 

Downloads

MS Datasheet