Pedrollo Future Jet Self-Priming Pumps 110V

Description

Pedrollo Future Jet Self-Priming Pumps 110V

INSTALLATION & USE

The Pedrollo Future Jet Self Priming pumps are designed to pump water even in cases where air is present. Because of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure tanks, and for the irrigation of gardens and orchards, etc.

Common applications include;

Irrigating a garden or pressurising a house from a shallow well
Irrigating a garden or pressurising a house from a stream
Irrigating a garden or pressurising a house from an underground rainwater harvesting tank

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.

CONSTRUCTION

Pump Body: Cast iron with ISO 228/1 threaded ports
Impeller: Stainless Steel AISI 304
Motor Shaft: Stainless steel AISI 431
Ports – Inlet & Outlet: 1″
Power Supply: 110V Single Phase (110/1/50) 

PERFORMANCE RANGE

Flow rate up to 120l/min (7.2 m³/h)
Head up to 72m

APPLICATION LIMITS

– Manometric suction lift up to 9m (HS)
– Liquid temperatures between -10°C and 40°C
– Ambient temperature up to 40°C
– Max working pressure: 6  bar for Future Jet 1  / 7 bar for Future Jet 2