Pedrollo PQA90 Pumps with Peripheral Impeller

Description

Pedrollo PQA90 Pumps with Peripheral Impeller – Side Suction

INSTALLATION & USE

The Pedrollo PQA90 peripheral pumps are recommended for pumping clean water without abrasive particles and with liquids which are not chemically aggressive towards the materials with which the pump is made. The RYTON and brass pump body construction guarantees against the formation of rust and oxidation. Because of these characteristics these peripheral pumps are suitable for use in commercial & industrial applications such as cooling, conditioning, boiler feeds and pressurisation sets.

– High heads achieved from low motor powers
– Small variations in delivery rates in the event of changes in the pressure demand
– High tolerance to entrained air in the pumped liquid

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

COMMON APPLICATIONS

Commercial – Cleaning Beer Line Systems;
Industrial – Chillers, Pressurisation Filler Units, Pressurisation Sets, Boiler Feeds, Coolant Systems

CONSTRUCTION

Pump Body: RYTON; Brass
Motor Bracket: Aluminium with Brass Insert
Impeller: Brass
Motor Shaft: Stainless Steel
Mechanical Seal: Ceramic / Graphite / NBR
Port sizes: ½”
Power Supply: 230V Single Phase (230/1/50) or 400V Three Phase (400/3/50)

PERFORMANCE RANGE

Flow rate up to 38 l/min
Head up to 90m

APPLICATION LIMITS

– Manometric Suction Lift up to 8m
– Liquid Temperature Between -10°C and 90°C
– Ambient Temperature Between -10°C 40°C  ( 45 °C for PQA60)
– Max. Working Pressure:  10 bar

 

Additional information

Weight	5.7 kg
Dimensions	Length: 192 mm Width: 118 mm Height: 145 mm
Motor Type	Single Phase, Three Phase

Performance Data

Downloads

PQA90 Datasheet