Pedrollo PK Pumps with Peripheral Impeller 110v

Description

Pedrollo PK Pumps with Peripheral Impeller – 110v

INSTALLATION & USE

Pedrollo PK pumps are mainly used in industrial applications due to their need for constant use and noisier running. Reliable, economical and simple to use, these compact peripheral pumps give good pressure at low flows.

The various models in the PK series are designed to suit a wide range of applications, with features including:

– High heads achieved from low motor powers
– Small variations in delivery rates in the event of changes in the pressure demand
– High tolerance to entrained air in the pumped liquid.

Designed to transfer clean water free from abrasive particles and liquids that will not damage the pump’s components.
Reliable, easy to operate, and cost-effective. They are ideal for domestic applications, specifically for gardens and orchards, in combination with small autoclave tanks.

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather

110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.

CONSTRUCTION

Pump Body: Cast Iron
Motor Bracket: Aluminium with Brass Insert
Impeller: Brass, radial peripheral vane type
Motor Shaft: Stainless Steel AISI 431
Mechanical Seal: Ceramic / Graphite / NBR
Power Supply: 110V (110/1/50)
Inlet & Oulet: 1″

PERFORMANCE RANGE

Flow rate up to 40 l/min (2.4 m³/h)
Head up to 100m

APPLICATION LIMITS

– Manometric Suction Lift up to 8m
– Liquid Temperature Between -10°C and 60°C
– Ambient Temperature up to 50°C 
– Max. Working Pressure: 6  bar
– Continuous service S1

OTHER PRODUCTS YOU MAY NEED

If you require this pump to automatically switch on and off, you will need a pump controller. We strongly advise you contact us to ensure we can recommend the right equipment for your job.