Pedrollo TOP Multi-Tech Submersible Multi-stage Well Pump (Automatic Control & Pressure Vessel)

Description

Pedrollo TOP Multi-Tech Submersible Multi-stage Well Pump with Integrated Fixed Speed Control & Pressure Vessel

INSTALLATION & USE

The Pedrollo TOP-MULTI-TECH Submersible pumps are recommended for pumping clean water and liquids that are not chemically aggressive for the materials from which the pump is made.

Because of their high efficiency and reliability, they are suitable for use in applications such as domestic water supply from reservoirs, tanks, or relatively deep wells, for drawing rainwater from cisterns to water gardens or for use in irrigation systems, etc.

TOP MULTI-TECH pumps are fitted with an internal electronic device that starts the pump when the pressure of the system falls below 1.5 bar (eg. when opening a tap) and stops it when the flow falls below 3 liters per minute.
It protects the pump:
– against dry running;
– against starting too frequently;
– against blockage: after long periods of pump inactivity the electronic device starts the
pump every 48 hours for 10 seconds.

Comes with A 4ltr pressure vessel included in the price. (GWS/PWB4LX)

For the best operation of the Top Multi-Tech pumps the installation of a pressure vessel is required. This helps avoid frequent pump start-ups which can result in energy savings. 

CONSTRUCTION

Glass fiber reinforced technopolymer delivery body, complete with threaded ports in compliance with ISO 228/1
Glass fiber reinforced technopolymer pump body and suction filter
Stainless steel AISI 304 motor sleeve
Noryl FE1520PW impellers
Noryl FE1520PW diffusers complete with anti-wear rings
Stainless steel motor shaft EN 10088-3 – 1.4104
Power Supply: 230V Single Phase (230/1/50)
Complete with:
– 10m long power cable
– Internal electronic device for pump starting (when tap opened) and stopping (when tap closed)
– Threaded connector 1 ¼” (delivery)
– Hose connector Ø 35 mm

PERFORMANCE RANGE

Flow rate up to  120l/min (7.2 m³/h)
Head up to 42m
Restart pressure: 1.5 bar

APPLICATION LIMITS

– 5 m maximum immersion depth
– Maximum height between pump and point of use 10m
– Maximum liquid temperature 40 °C
– Suction down to 22 mm above ground level
– Continuous service S1