Powerdrain Foul Single Pump Station 240ltr

Description

Powerdrain Foul Single Pump Station 240ltr

INSTALLATION & USE

The Single foul packaged pump stations are designed to collect wastewater from below-ground extensions, garden rooms, small conversions. The VX pump range is designed to remove both clean and dirty water. Common applications would be to collect foul water from a W.C. sink, shower, kitchen or utility room and then discharge it to the main waste pipe or pumping sewage up to septic tanks and sewage treatment plants. Other applications include the removal of rainwater collecting in the basement. The Powerdrain range has been designed to ensure an easy and trouble-free installation.

FEATURES

240 litre Sump Chamber
450mm inspection chamber frame and lid
1 x Pedrollo VXm10/50 automatic pump with fully assembled discharge pipe work
Discharge hole in chamber pre-drilled
Inlet holes need drilling
Full height float switch slide
50mm solids handling for sewage with Vortex Pumps

CONSTRUCTION

Chamber Material: MDPE
Chamber Max Volume: 240 Litres
Non-return Valve: Quiet operation EDPM swing check valve
Discharge Connection 2” BSP male
Internal Pipework and fittings: All manufactured to EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 – Note threaded fittings are rated at 12 Bar.
Cable Duct Pipework: 1.5″ BSP Male 16 Bar fitting (optional 40mm waste adaptor supplied)
Pumps: 1x Pedrollo VXm10/50 Automatic
Riser/Lid: 450mm X 150mm fixed riser – most 450mm inspection chamber lids fit
Float Switch: Full length aluminium flat switch slide for full chamber depth adjustment
Dimensions: h: 800mm ø: 740mm